Description
Series 75 & 76
Our Worm Drive Clamps are produced according to DIN 3017 standard with 9mm and 12mm bandwidths.
Normal stock has 7mm hex head screws and 6mm is available to order with popular 9mm band clips held in stock.
The screw housing is a mechanical locking system which improves effective tightening and helps early sealing even at low torque values. It also allows the housing to resist much higher torque values before any misshape compared to other housing designs
The clamps are stamped and smooth on the inside with rolled edges to protect the hose from any damage. Our standard stock range is available in W2B and W4 materials, other materials are to order.
They have a wide application in manufacturing industries including:
|
|
Available in 9mm and 12mm bandwidths:
Finish Details | CR* | Screw Head | ||||
Material |
Screw | Housing | Band | Hours | Phillips | Slotted |
W1 | Mild Steel Zinc plated |
Mild Steel Zinc plated |
Mild Steel Zinc plated |
72 | * | |
W2 | Mild Steel Zinc plated |
AISI 430 Stainless steel | AISI 430 Stainless steel | 72 | * | |
W3 | AISI 430 Stainless steel | AISI 430 Stainless steel | AISI 430 Stainless steel | 200 | * | |
W4 | AISI 304 Stainless steel | AISI 304 Stainless steel | AISI 304 Stainless steel | 240 | * | |
W5 | AISI 316 Stainless steel | AISI 316 Stainless steel | AISI 316 Stainless steel | 400 | * |
* = Corrosion resistance
Note: Sealing pressure is more important than breaking pressure.
Please note, rights are reserved to alter specification without prior notification.